LASERLINCE

Categories

Green laser (532nm) (25)
Red laser (630nm) (13)
Violet laser (405nm) (12)
-Yellow Laser - (593nm) (3)
Infrared laser (808-980nm) (17)
-Laser Glasses- (15)
-Electroluminescent Lighting (20)
-Eyewear for IPL intense pulsed (6)
-Ozone systems (4)
-Laser and optical sight - (8)
-Measuring Equipment (26)
-Sight- (9)
-Special-Lanterns (21)
batteries (28)
Electronics (41)
-Night Vision Goggles- (2)
Stands & Mounts (20)
Laser modules for disco (25)
laser module for lab (60)

Quick Find

Information

Shipping & Returns
Privacy Notice
About us
Frequently Asked Questions

1.8'' TFT LCD with SD card adapter

20,00€

Click to enlarge

1.8'' TFT LCD with SD card adapter.
Size: 1.8 inches.
Pixels: 128 * 160.
Compatible with the Arduino system.
ST7735R incorporates LCD controller.
SPI Bus Interface
TTL compatible 5, 5V / 3.3 V, can be used in the system directly Arduino 5V/3.3V IO.
Includes SD card connector.
Can be used on platforms MCUs, ARM, CPLD, FPGA, DSP.

PINES:
GND: Ground
SD_CS: SD card chipselect active in low
LCD_CS: chipselect for LCD, active in low
SCLK: SPI Clock
MOSI: SPI Master out, Slave in
MISO: SPI Master in, Slave out
RS: Selection of command / data
RESET: Reset LCD controller, active low
BKL: LCD backlight activates in low
VCC: Power Input 5V

This product was added to our catalog on Friday 30 August, 2013.

Phone number:
+0034665019380

Contact e-mail:
info@laserlince.com

Shopping Cart

3 x	D2 Blue laser module 1000mW (450nm) with TTL modulation
1 x	T5 5000mW infrared laser diode (808nm)
2 x	Goggles green and violet laser Eagle Pair
1 x	1 Rechargeable Battery UltraFire 18650 3600mAh 3.7 V PCB system
1 x	B5 1000mW green laser module (532nm) Modular
2 x	Red Laser dot Generators 5mW (650nm)
1 x	Ozone concentration analyzer in air 03
1 x	Inverter for 12V DC LED light
1 x	AV1 Green laser module line generator 50mW 532nm
1 x	Pyroelectric infrared sensor PIR Motion HC-SR501
1 x	E4 infrared laser module 500 mW (980nm)
1 x	01 Steel-aluminum bracket for 12mm industrial laser calibration
1 x	D3 Blue laser module 3500mW (450nm) with TTL modulation
1 x	MG995 Servo kit mounts 2 units with robot arm
1 x	E1c Green Laser Pointer adjustable and focusable LXGD (532nm) 10
1 x	915MHz Wireless Transceiver for remote control CC1101
3 x	02 Green laser pointer 10mW (532nm)
1 x	Sensor light color and intensity of TCS TAOS Focusable Lens 3200
1 x	40 Dupont Wire Cable 180mm length 2.54 mm male female
2 x	Lente de división y combinación de láser rojo con Verde-Azul-IR
1 x	Relay 2 Channel 5V DC 30V 10A - 250VAC
3 x	AGV 10mW 650nm red laser pointer with a fiber optic coupler
6 x	Crimpadora for RJ45
1 x	B9 1000mW (520nm) green laser module with TTL modulation
1 x	BL1 1000mW 450nm Blue Laser Pointer
1 x	RGB color sensor and light intensity ENV-RGB Scientific Atlas
1 x	Alfa2W 2000mW laser engraving machine with USB connectivity
1 x	Linear polarizer for laser power regulation
4 x	A9c 0,5mW red laser module 650nm spot generator ø = 4mm
1 x	REMOTE CONTROL FOR WIRELESS USB LASER POINTER + PowerPoint
5 x	Module with Humidity Sensor or Hygrometer for Arduino
4 x	06 Puntero láser 980nm regulable en alza y deriva
4 x	MG995 servo motor torque speed with metal gears
3 x	Goggles violet and ultraviolet laser
2 x	Temperature sensor DS18B20 1-Wire Interface Board
2 x	D2 5mW Blue Laser Module (445nm) with TTL modulation
1 x	Goggles for green laser Eagle Pair
2 x	8.4 V rechargeable Ni-MH 1500mAh Firefox
1 x	matrix keyboard 4 x 4, membrane switch 16
1 x	02 Support steel for industrial calibration
3 x	Montura ajustable párrafo Reflexión de láser CO2 lentes de 25mm
1 x	module 50mw blue laser (473nm) for laboratory 220V
2 x	Sensor light color and intensity TAOS TCS 3414FN
3 x	Rechargeable Battery Charger AA / AAA RAM
1 x	Red and Infrared laser protection goggles 600 to 1100nm OD 6 +
1 x	A3 Green laser pointer 20mW (532nm)
2 x	Temperature sensor DS18B20 1-Wire interface
1 x	AG1 Módulo láser RGB 400mW con modulación TTL
1 x	Dual channel converter 110V-220V, 220V-110V
1 x	B1 80mW green laser point generator with fan (532 nm)
1 x	Mounts sights or laser pointers 11mm Picatinny Rail (30mm)
1 x	03R 50mW (650nm) Red Laser Pointer
1 x	Module 150mW red laser (650nm) for laboratory 220V
1 x	Laser module 0 to 0.5mW with power control driver
1 x	ARDUINO UNO REV3 ATmega328Pboard
1 x	C5 Module 150mW violet laser (405nm) with TTL modulation
1 x	Rail mount for attaching 11mm to 20mm Picatinny Rail
1 x	A2 Module red laser line generator industrial focus 10mW (650nm)
1 x	Arduino DUE SAM3X8E 32 bit ARM Cortex M3
1 x	B5b 50mW (520nm) Green Laser Module 12mm DDL Spot Generator
2 x	Rangefinder compact laser (700m range)
1 x	infrared laser point generator Focusable 50mW (808 nm)
1 x	A1 Industrial marking equipment 100mW 660nm red laser line
1 x	Compact aluminum mounting MP5 and G3 Picatinny 20mm rail
1 x	AG2 1000mW RGB laser module with TTL modulation
1 x	Mount clamp to Picatinny rail with 25mm bracket
1 x	E8 Pointer 50 mW Green laser (532nm) lamp type
1 x	C3 Module 100mW violet laser (405nm)
1 x	B2 NewWish Green Laser Pointer 50mW ON/OFF (532nm)
1 x	IR light blue, white strobe miliary type MS-2000 3989.1
1 x	1 Rechargeable CR123A 3.7 V model TrustFire TF 16340
1 x	D4 collimator green laser pointer 100mW (532nm) SDLaser 302

10472,00€

Notifications

Notify me of updates to 1.8'' TFT LCD with SD card adapter

Reviews

Write a review on this product!

Languages

Currencies

21 % de IVA incluido en todos los precios
Laserlince, S.L. / N.I.F.: B 47 635 859 / Registro Mercantil de Valladolid Tomo 1342 hoja VA-217 Inscrip.:1� libro 0 folio 125.
Copyright 2008 © 2024 LASERLINCE