LASERLINCE

Categories

Green laser (532nm) (25)
Red laser (630nm) (13)
Violet laser (405nm) (12)
-Yellow Laser - (593nm) (3)
Infrared laser (808-980nm) (17)
-Laser Glasses- (15)
-Electroluminescent Lighting (20)
-Eyewear for IPL intense pulsed (6)
-Ozone systems (4)
-Laser and optical sight - (8)
-Measuring Equipment (26)
-Sight- (9)
-Special-Lanterns (21)
batteries (28)
Electronics (41)
-Night Vision Goggles- (2)
Stands & Mounts (20)
Laser modules for disco (25)
laser module for lab (60)

Quick Find

Information

Shipping & Returns
Privacy Notice
About us
Frequently Asked Questions

1.8'' TFT LCD with SD card adapter

20,00€

Click to enlarge

1.8'' TFT LCD with SD card adapter.
Size: 1.8 inches.
Pixels: 128 * 160.
Compatible with the Arduino system.
ST7735R incorporates LCD controller.
SPI Bus Interface
TTL compatible 5, 5V / 3.3 V, can be used in the system directly Arduino 5V/3.3V IO.
Includes SD card connector.
Can be used on platforms MCUs, ARM, CPLD, FPGA, DSP.

PINES:
GND: Ground
SD_CS: SD card chipselect active in low
LCD_CS: chipselect for LCD, active in low
SCLK: SPI Clock
MOSI: SPI Master out, Slave in
MISO: SPI Master in, Slave out
RS: Selection of command / data
RESET: Reset LCD controller, active low
BKL: LCD backlight activates in low
VCC: Power Input 5V

This product was added to our catalog on Friday 30 August, 2013.

Phone number:
+0034665019380

Contact e-mail:
info@laserlince.com

Shopping Cart

1 x	1X30 red dot red and green
2 x	Goggles for green laser Eagle Pair
2 x	Integral laser protection glasses 190-470 & 800-1700 OD5 +
1 x	W5100 Ethernet Module for Arduino micro-SD Adapter
2 x	Goggles for red laser Eagle Pair OD 5+
1 x	Red dot holographic BSA 1x30 Red and Green
1 x	Laser protection glasses ultravioletade 190 to 400nm OD 5 +
1 x	Goggles violet and ultraviolet laser
1 x	L368RGY (red, green and yellow 500mW)
1 x	09 Infrared collimator laser pointer 10mW (808nm)
1 x	12V 2A Wireless Electric Transmission Coils
1 x	Red green and red dot for Walther MP5
1 x	Infrared laser protection glasses of 800-1100 nm OD 6+
2 x	REMOTE CONTROL FOR WIRELESS USB LASER POINTER + PowerPoint
1 x	1x30 Green Red dot holographic red, blue Aimpoint
1 x	Red and Infrared laser protection goggles 600 to 1100nm OD 6 +
1 x	Red Dot AIMPOINT 4 reticles Red and Green
1 x	ltrasonic Distance Sensor HC-SR04
1 x	IR light blue, white strobe miliary type MS-2000 3989.1
1 x	200mW 980nm infrared laser pointer
1 x	T2 1000mW infrared laser diode (808nm)
1 x	Goggles CO2 infrared laser 10600nm OD 5+
1 x	Digital power controller for laser (TTL modulator)
2 x	Laser goggles for red, blue and ultraviolet
1 x	Arduino DUE SAM3X8E 32 bit ARM Cortex M3
1 x	01 Green laser pointers of 50 mw (532nm)
1 x	03 E1c Laser Pointer adjustable LXGD focusable infrared (808nm)
1 x	Red dot holographic 1X24 MICRO Green, red Aimpoint
2 x	Goggles green and violet laser Eagle Pair
1 x	Red dot holographic BSA 1x42 Red and Green
1 x	Card Reader SIM cards for mobile phones.
1 x	Dual channel converter 110V-220V, 220V-110V
1 x	Mount laser pointers view or Picatinny rail-20mm (30mm)
1 x	Goggles for 740-850nm infrared laser diode
1 x	Module with Humidity Sensor or Hygrometer for Arduino
1 x	Sony Alkaline Batteries AAA 8 units
1 x	03 100mW red laser pointer (650nm) 2XAAA
1 x	Mount clamp to Picatinny rail with 25mm bracket
1 x	1.2 V rechargeable battery of 9000mAh Ni-MH
1 x	Mount sights or laser pointers rail 11mm Picatinny rails (30mm)
1 x	Telescopic sight glass Tasco 4X20
1 x	Riflescope Bushnell 9x40 backlit 3
1 x	Steel mounting bracket for attaching double-laser pointers
1 x	Temperature sensor DS18B20 1-Wire interface
1 x	Aluminum mounting bracket 25 mm with 20mm rail
1 x	L2000 (red, green and yellow 260mW)
1 x	07 Red laser collimator for 650nm Newtonian telescope
1 x	Picatinny Rail with screws coupled to 6-way
1 x	Mounts sights or laser pointers 11mm Picatinny Rail (30mm)
1 x	Temperature sensor DS18B20 1-Wire Interface Board
1 x	Panasonic Alkaline Batteries AAA 4 units.
1 x	Red laser adjustable LXGD CR2 5mW for shooting accuracy
1 x	Mount laser pointers view or Picatinny rail-20mm (H)
1 x	Compact aluminum mounting MP5 and G3 Picatinny 20mm rail
1 x	L318RGY (red, green and yellow 150mW)
1 x	1 23A brand alkaline batteries 12V GP
1 x	Aluminum mount M4 and M16 with 20mm Picatinny Rail
1 x	01 Steel-aluminum bracket for 12mm industrial laser calibration
1 x	Goggles infrared laser from 680 to 1100nm OD 7 +
1 x	02 Support steel for industrial calibration

5449,00€

Notifications

Notify me of updates to 1.8'' TFT LCD with SD card adapter

Reviews

Write a review on this product!

Languages

Currencies

21 % de IVA incluido en todos los precios
Laserlince, S.L. / N.I.F.: B 47 635 859 / Registro Mercantil de Valladolid Tomo 1342 hoja VA-217 Inscrip.:1� libro 0 folio 125.
Copyright 2008 © 2024 LASERLINCE